You have one of the most functional instant cameras from Fujifilm in your hands! It is powered by 2 CR2 batteries . And what to do with all these buttons — we will figure it out now:
1) To turn on the camera — slide the button (1) from “off” to “on”. After that, the objects (10) immediately come out. It has a mirror for selfies (11) (what you see in the reflection will be captured in the frame);
2) Next to the button is the compartment from which the shots come out;
3) This is an indicator; it blinks red when using the timer;
4) Viewfinder — the lens is not aligned with the viewfinder direction. When framing the shot, leave free space on the sides so the picture crops correctly;
5) This is the strap hole;
6) Shutter button. Press it when you want to take a shot;
7) The camera is automatic and measures light using this sensor and the flash sensor (8). The flash power depends on the lighting (12);
8) This is the tripod socket (9);
Back panel:
13) This indicator shows which mode is enabled. Use the "mode" buttons (15) to select the desired one:
- Automatic mode — "A";
- Selfie mode;
- Macro mode (allows you to take shots at a distance of 30–50 cm);
- Landscape (allows you to take shots at a distance of 2 m – ∞);
- Multiple exposure (press the shutter button twice to get a shot composed of two images overlaid);
- "Brighter/Darker" mode (allows you to control the brightness of the shots).
16) "Timer" button (10 sec);
17) Turn off the flash (it can be turned off when it's sunny or if the camera is on a tripod);
18-19) The cover opens when you press the lock down;
20) Frame counter changes after each shot, from 10 to 0;
21) Battery compartment, where you will find a diagram on how to insert the batteries correctly;
22) Transparent window where you can see the cartridge;
23) Viewfinder.
How to insert the cartridge?
Open the back cover and insert the cartridge so that the yellow stripe on it matches the yellow stripe on the camera. The yellow stripe should face you. Close the cover - the camera is ready to use. "But instead of the frame counter, there is a 'minus' sign! Don’t worry. Turn on the camera and take a test shot: the black protective cardboard will come out of the camera, and the counter will change the display to '10'. (Try not to open the back cover again, otherwise unexposed shots will be exposed, the frame counter will be reset, and the letter 'S' will appear instead).
Now you can take a full 10 shots. Press the button— magic happens. At first, a white photo appears. But give it a little time— and after a few minutes, a full image will appear. The optimal development temperature— 5-35 degrees. The warmer it is— the photo will develop faster. Then you can do anything with the photo— the photo will not disappear.
Additionally:
- Unexposed cartridges can be returned. The main thing is that they are in the package.
- Used cartridges can be brought to us. We will recycle them.
-
If you have any questions or want to extend the rental period, call 380992568586 or write in Telegram.